Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Quarter Upper Trim Panel

Courtesy of GENERAL MOTORS CORP.

Align the push-in retainers on the upper trim panel to the inner panel.
Install the push-in retainers, applying pressure to secure the panel at all of the retainer locations.

Fig 2: Identifyng Upper Quarter Trim Push Pin

Courtesy of GENERAL MOTORS CORP.

Install the push pins to the upper quarter trim.
Install the rear seat belt guide loop to the rear upper quarter trim panel. Refer to Seat Belt Retractor Replacement - Rear in Seat Belts.

Fig 3: Locating Rear Upper Quarter Trim Panel

Courtesy of GENERAL MOTORS CORP.

Install the upper quarter screw.
Install the rear roof garnish molding. Refer to Garnish Molding Replacement - Rear Upper .