LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1089 (Interior Trim) >> Repair Instructions >> Trim Panel Replacement - Rear Quarter Lower (Rendezvous) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear No. 2 seat. Refer to Seat Replacement - Rear No. 2 (Buick) in Seats.
  2. Remove the seat belt guide loops from the rear seat and from the rear No. 2 seat. Refer to Seat Belt Retractor Replacement - Rear and to Seat Belt Retractor Replacement - No. 2 Rear in Seat Belts.
  3. Remove the upper trim panels from the rear quarter. Refer to Trim Panel Replacement - Rear Quarter Upper (Aztek)  or Trim Panel Replacement - Rear Quarter Upper (Rendezvous)  .
    4. Fig 1: Rear Quarter Lower Trim Panel View (Rendezvous)
    GM771737Courtesy of GENERAL MOTORS CORP.
  4. Remove the bolts which secure the cargo net tie-down loops.
  5. Remove the cargo net tie-down loops from the rear quarter trim panel.
  6. Remove the rear quarter trim panel from the vehicle.
scientia non olet · About LEMON Manuals