LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1089 (Interior Trim) >> Repair Instructions >> Trim Panel Replacement - Rear Quarter Lower (Aztek) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Rear Quarter Lower Trim Panel Bolts (Aztek)
    GM620951Courtesy of GENERAL MOTORS CORP.
  1. Remove the endgate plate. Refer to Door Sill Plate Replacement - Endgate  .
  2. Remove the rear seat belt. Refer to Seat Belt Retractor Replacement - Rear in Seat Belts.
  3. Remove the rear upper quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter Upper (Aztek)  or Trim Panel Replacement - Rear Quarter Upper (Rendezvous)  .
  4. Remove the bolts from the rear quarter lower trim panel at the cargo tie down locations.
    5. Fig 2: View Of Rear Quarter Lower Trim Panel (Aztek)
    GM620954Courtesy of GENERAL MOTORS CORP.
  5. Remove the rear quarter lower trim panel from the inner panel by pulling the panel to release the push-in retainers.
  6. Remove the lower trim panel from the vehicle.
scientia non olet · About LEMON Manuals