Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Door Sill Plate Push-In Retainers

Courtesy of GENERAL MOTORS CORP.

Install the front door sill plate push-in retainers and the 4-way locator, pressing in place until fully seated.

Fig 2: Locating Front Door Sill Plate

Courtesy of GENERAL MOTORS CORP.

Align the front door sill plate to the 4-way locator and the push-in retainers.
Install the front door sill plate to the push-in retainers, applying pressure to secure at all tab locations.