LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1089 (Interior Trim) >> Repair Instructions >> Door Sill Plate Replacement - Endgate >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Endgate Sill Plate Push-In Retainers
    GM620970Courtesy of GENERAL MOTORS CORP.
  1. Install the endgate sill plate push-in retainers and the 4-way locator, pressing in place until fully seated.
    2. Fig 2: View Of Endgate Door Sill Plate
    GM620972Courtesy of GENERAL MOTORS CORP.
  2. Align the endgate sill plate to the 4-way locator and the push-in retainers.
  3. Install the endgate sill plate to the push-in retainers, applying pressure to secure at all tab locations.
scientia non olet · About LEMON Manuals