Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Garage Door Panel

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connectors for the garage door and the OnStar(R) consoles.
Install the overhead console to the vehicle.

Fig 2: Locating Onstar(R) Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the overhead console screws.
Tighten: Tighten the screws to 2 N.m (18 lb in).
Close the garage door panel and the OnStar(R) door on the overhead console.