LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1086 (Door System, Mirror System & Window System) >> Repair Instructions >> Window Replacement - Rear Door >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the rear door window in the full down position.
  2. Remove the trim panel. Refer to Trim Panel Replacement - Side Rear Door (Aztek)  or Trim Panel Replacement - Side Rear Door (Rendezvous) .
  3. Remove the water deflector. Refer to Water Deflector Replacement - Rear Door .
  4. Remove the outer belt sealing strip. Refer to Sealing Strip Replacement - Rear Door Window Belt Outer .
  5. Remove the window weatherstrip. Refer to Weatherstrip Replacement - Rear Door Window .
  6. Loosen the bolts (1) to the clevice clamps.
    Fig 1: Loosening Clevice Clamp Bolts
    GM621642Courtesy of GENERAL MOTORS CORP.
  7. Remove the window from the outside of the rear door.
    Fig 2: Identifying Window Glass
    GM621633Courtesy of GENERAL MOTORS CORP.