LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1086 (Door System, Mirror System & Window System) >> Repair Instructions >> Window Replacement - Front Door >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the front door window in the full down position.
  2. Remove the trim panel. Refer to Trim Panel Replacement - Side Front Door (Aztek)  or Trim Panel Replacement - Side Front Door (Rendezvous) .
  3. Remove the water deflector. Refer to Water Deflector Replacement - Front Door .
  4. Remove the outer belt sealing strip. Refer to Sealing Strip Replacement - Front Door Window Belt Outer .
  5. Remove the window weatherstrip. Refer to Weatherstrip Replacement - Front Door Window .
  6. Loosen the bolts (1) to the front and rear clevice clamps.
    Fig 1: Identifying Clevice Clamp Bolts
    GM621651Courtesy of GENERAL MOTORS CORP.
  7. Remove the window from the outside of the front door.
    Fig 2: View Of Window Glass
    GM621645Courtesy of GENERAL MOTORS CORP.