LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1086 (Door System, Mirror System & Window System) >> Repair Instructions >> Weatherstrip Replacement - Auxiliary >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the rear door.
  2. Remove the rear pillar auxiliary weatherstrip using J 38778  .
    Fig 1: View Of Rear Pillar Auxiliary Weatherstrip
    GM621629Courtesy of GENERAL MOTORS CORP.
  3. Open the front and rear doors.
  4. Remove the center pillar auxiliary weatherstrip using J 38778  .
  5. Remove the roof rail auxiliary weatherstrip push-in retainers from the rear pillar using J 38778  .
    Fig 2: Locating Roof Rail Auxiliary Weatherstrip Push-In Retainers
    GM621626Courtesy of GENERAL MOTORS CORP.
  6. Remove the roof rail auxiliary weatherstrip from the roof rail flange pulling from the rear to front.
    Fig 3: View Of Roof Rail Auxiliary Weatherstrip In Roof Rail Flange
    GM621631Courtesy of GENERAL MOTORS CORP.

    Bending back the roof rail auxiliary weatherstrip onto itself to open the carrier while pulling forward will ease the removal effort.