LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1086 (Door System, Mirror System & Window System) >> Repair Instructions >> Reflector Replacement - Rear Door Warning (Aztek) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the rear door.
  2. Apply protective coating/tape at the point of insertion of the flat bladed tool.
  3. Remove the warning reflector from the rear door trim panel using a small flat bladed tool, pressing on the tabs from the top of the warning reflector.
    Fig 1: View Of Reflector (Aztek)
    GM624048Courtesy of GENERAL MOTORS CORP.
  4. Remove the warning reflector from the rear door trim panel.
    5. Fig 2: Identifying Warning Reflector
    GM624046Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals