LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1086 (Door System, Mirror System & Window System) >> Repair Instructions >> Power Window Switch Replacement - Right Front (Rendezvous) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power window switch into the power window switch plate. Press the switch into place until fully seated.
    Fig 1: View Of RF Power Window Switch (Rendezvous)
    GM771774Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connectors to the power window switch.
  3. Install the power window switch plate to the front door panel. Press the plate into place until fully seated.
scientia non olet · About LEMON Manuals