Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Use a small flat-bladed tool in order to remove the switch plate from the front door trim panel

Fig 1: Identifying Front Door Trim Panel Switch Plate (Rendezvous)
Courtesy of GENERAL MOTORS CORP.
Disconnect the electrical connectors from the switch plate.

Fig 2: View Of LF Switch Plate Electrical Connectors (Rendezvous)
Courtesy of GENERAL MOTORS CORP.
Use a small flat-bladed tool in order to remove the power mirror switch from the switch plate

Fig 3: Identifying Front Door Switch Plate (Rendezvous)
Courtesy of GENERAL MOTORS CORP.