LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1086 (Door System, Mirror System & Window System) >> Repair Instructions >> Motor Replacement - Power Mirror >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (Aztek)  or Trim Panel Replacement - Side Front Door (Rendezvous) .
  2. Remove the mirror face. Refer to Mirror Face Replacement .
  3. Remove the mirror motor screws.
    Fig 1: Locating Mirror Motor Screws
    GM826509Courtesy of GENERAL MOTORS CORP.
  4. Pull the mirror motor out from the mirror housing to gain access to the mirror motor electrical connectors.
    Fig 2: Expanded View Of Mirror Motor
    GM826512Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the mirror motor electrical connectors.
    Fig 3: View Of Mirror Motor Electrical Connectors
    GM826511Courtesy of GENERAL MOTORS CORP.
  6. Remove the mirror motor from the mirror housing.
scientia non olet · About LEMON Manuals