LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1086 (Door System, Mirror System & Window System) >> Repair Instructions >> Lock Cylinder Replacement - Door >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door panel. Refer to Trim Panel Replacement - Side Front Door (Aztek)  or Trim Panel Replacement - Side Front Door (Rendezvous) .
  2. Remove the front door water deflector. Refer to Water Deflector Replacement - Front Door .
  3. Disconnect the front door lock cylinder rod from the front door lock.
  4. Remove the front door lock cylinder retainer from the front door lock cylinder.
    Fig 1: Front Door Lock Cylinder
    GM621786Courtesy of GENERAL MOTORS CORP.
  5. Remove the front door lock cylinder from the front door lock cylinder hole with the lock cylinder rod.
  6. Remove the lock cylinder rod from the front door lock cylinder.