LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1086 (Door System, Mirror System & Window System) >> Repair Instructions >> Hinge Replacement - Rear Door >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Complete this procedure with the rear door closed at all times. Replace the broken door hinge first.
  1. Open the front door.
  2. Clean the mounting surfaces with a clean rag and mark the rear door hinge locations on each surface with a grease pencil or other suitable marker.
  3. Remove the bolts from the door side rear door hinge.
    Fig 1: Locating Door Side Rear Door Hinge Bolts
    GM621560Courtesy of GENERAL MOTORS CORP.
  4. Remove the bolts from the body side rear door hinge.
    Fig 2: Body Side Rear Door Hinge Bolts View
    GM611439Courtesy of GENERAL MOTORS CORP.
  5. Remove the rear door hinge from the vehicle.