Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Protect the applique with heavy material tape in order to avoid damaging the underlying paint finish or applique. Do not use a pointed or a sharp instrument for the removal of the applique.

Remove the window outer belt sealing strip. Refer to Sealing Strip Replacement - Front Door Window Belt Outer .
Remove the center of the rivets using a center punch.

Fig 1: Punching Out Rivets
Courtesy of GENERAL MOTORS CORP.
Drill out the rivets from the front door frame applique.

Fig 2: Drilling Out Rivets
Courtesy of GENERAL MOTORS CORP.
Remove the frame applique from the front door.

Fig 3: View Of Frame Applique
Courtesy of GENERAL MOTORS CORP.