Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Roof Side Rail Lamp

Courtesy of GENERAL MOTORS CORP.

Using a small, flat-bladed tool, remove the cover of the coat hook access hole from the roof side rail lamp.
Using a small, flat-bladed tool, remove the cover from the lamp.
Remove the screws from the lamp.

Fig 2: Identifying Roof Side Rail Lamp Components

Courtesy of GENERAL MOTORS CORP.

Remove the lamp from the roof.
Disconnect the electrical connectors from the lamp.