LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1085 (Lighting Systems) >> Repair Instructions >> Park/Turn Signal Lamp Replacement (Aztek) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Park/Turn Signal Lamp Screws
    GM621212Courtesy of GENERAL MOTORS CORP.
  1. Open the hood.
  2. Remove the screws from the front parking/sidemarker lamp.
    3. Fig 2: View Of Front Parking/Sidemarker Lamp Wiring Harness
    GM623906Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the front parking/sidemarker lamp wiring harness from the pinch-weld flange.
    4. Fig 3: Locating Front Parking/Sidemarker Lamp
    GM621230Courtesy of GENERAL MOTORS CORP.
  4. Remove the front parking/sidemarker lamp from the front fender.
    5. Fig 4: View Of Front Parking/Sidemarker Lamp Socket
    GM623914Courtesy of GENERAL MOTORS CORP.
  5. Remove the front parking/sidemarker lamp socket, depressing the locking tab and turning counterclockwise.
    6. Fig 5: Front Parking/Sidemarker Lamp Bulb
    GM623902Courtesy of GENERAL MOTORS CORP.
  6. Remove the bulb from the front parking/sidemarker lamp socket, if replacing the bulb.
scientia non olet · About LEMON Manuals