LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1085 (Lighting Systems) >> Repair Instructions >> License Lamp Replacement (Rendezvous) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear lift gate applique. Refer to Liftgate Applique Replacement in Body Rear End.
    2. Fig 1: View Of License Lamp (Rendezvous)
    GM761259Courtesy of GENERAL MOTORS CORP.
  2. Remove the license plate lamp from the applique by pulling rearward from the applique.
  3. Remove the license plate lamp socket, turning counterclockwise.
  4. Remove the license plate lamp bulb from the license plate lamp socket, if necessary.
scientia non olet · About LEMON Manuals