Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of License Lamp (Rendezvous)

Courtesy of GENERAL MOTORS CORP.

Install the license plate lamp bulb to the license plate lamp socket, if removed.
Install the license plate lamp socket to the license lamp, turning clockwise.
Install the license plate lamp to the rear lift gate applique, pressing until fully seated.
Install the rear lift gate applique. Refer to Liftgate Applique Replacement in Body Rear End.