LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1085 (Lighting Systems) >> Repair Instructions >> Daytime Running Lamps (DRL) Ambient Light Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Daytime Running Lamp Ambient Light Sensor Socket
    GM458215Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper (Aztek) or Trim Pad Replacement - Instrument Panel (I/P) Upper (Rendezvous) in Instrument Panel, Gages and Console.
  2. Remove the daytime running lamp ambient light sensor socket from instrument panel trim pad by twisting 1/4 turn counterclockwise.
    3. Fig 2: Locating Daytime Running Lamp Ambient Light Sensor
    GM458216Courtesy of GENERAL MOTORS CORP.
  3. Remove the daytime running lamp ambient light sensor from the daytime running lamp ambient light connector.
scientia non olet · About LEMON Manuals