LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1085 (Lighting Systems) >> Repair Instructions >> Daytime Running Lamps (DRL) Ambient Light Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Daytime Running Lamp Ambient Light Sensor
    GM458216Courtesy of GENERAL MOTORS CORP.
  1. Install the Daytime running lamp ambient light sensor to the daytime running lamp ambient light sensor socket.
    2. Fig 2: Identifying Daytime Running Lamp Ambient Light Sensor Socket
    GM458215Courtesy of GENERAL MOTORS CORP.
  2. Install the daytime running lamp ambient light sensor socket to instrument panel trim pad twisting 1/4 turn clockwise.
  3. Install the instrument panel upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper (Aztek) or Trim Pad Replacement - Instrument Panel (I/P) Upper (Rendezvous) in Instrument Panel, Gages and Console.
scientia non olet · About LEMON Manuals