Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Refer to Fastener Notice in Cautions and Notices.

IMPORTANT: Clean any existing corrosion from the battery cable and the battery terminal.

Fig 1: Identifying Battery Ground (Negative) Cable Terminal

Courtesy of GENERAL MOTORS CORP.

Install the battery ground (negative) cable to the battery.
Tighten: Tighten the battery terminal nut to 9 N.m (80 lb in).
Program all of the customer's radio station presets and set the radio clock to the current time.