Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Refer to Fastener Notice in Cautions and Notices.

IMPORTANT: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.

Fig 1: View Of Battery Ground (Negative) Cable And Bolt

Courtesy of GENERAL MOTORS CORP.

Install the battery ground (negative) cable and bolt to the battery.
Tighten: Tighten the battery terminal bolt to 16 N.m (12 lb ft).
Program all of the customer's radio station presets and set the radio clock to the current time.