Test Description
WARNING: This page is about a different car, the 2002 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
The numbers below refer to the step numbers in the diagnostic procedures.
- 3
Listen for a click when the solenoid valve operates. Verify that the ON state and the OFF state are commanded. Repeat the commands as necessary. - 5
This step tests for voltage to the AIR solenoid valve. - 6
This step verifies that the PCM is providing ground to the AIR solenoid valve. - 7
This step tests if a ground is constantly being applied to the AIR solenoid valve.