LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1057 (Engine Mechanical - 6.6L (Lb7) (Repair Instructions 3 Of 4)) >> Repair Instructions (Off-Vehicle - Part 3) >> Fuel Injection Pump Installation

Fuel Injection Pump Installation

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate the O-ring on the fuel injection pump adapter with engine oil.
  2. Install the fuel injection pump and adapter assembly.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the fuel injection pump bolts.

    Tighten:  Tighten the fuel injection pump bolts to 21 N.m (15 lb ft).

    4. Fig 1: View Of Fuel Injection Pump & Bolts
    GM660523Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals