LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1056 (Engine Mechanical - 4.8L, 5.3L & 6.0L (Repair Instructions - 2 Of 3)) >> Repair Instructions (Off-Vehicle Repair Instructions Part 2) >> Engine Valley Cover Removal

Engine Valley Cover Removal

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the knock sensor wire harness.
    2. Fig 1: View Of Knock Sensor Wire Harness
    GM309859Courtesy of GENERAL MOTORS CORP.
  2. Remove the knock sensors.
    3. Fig 2: View Of Knock Sensors
    GM309864Courtesy of GENERAL MOTORS CORP.
  3. Remove the valley cover bolts.
  4. Remove the valley cover and gasket.
    5. Fig 3: View Of Engine Valley Cover, Gasket & Bolts
    GM65048Courtesy of GENERAL MOTORS CORP.
  5. Discard the valley cover gasket.
  6. Remove the knock sensor oil seals (520) from the cover (555).
    7. Fig 4: View Of Knock Sensor Oil Seals & Valley Cover
    GM1277106Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals