LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1054 (Engine Exhaust System) >> Repair Instructions >> Exhaust Hanger Replacement (6.6L Engine with RPO YF2) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the exhaust muffler hanger nuts.
    Fig 1: Exhaust Muffler Hanger Nuts (6.6L Engine with RPO YF2)
    GM694335Courtesy of GENERAL MOTORS CORP.
  3. Remove the hanger from the hanger insulator.
scientia non olet · About LEMON Manuals