Locking Differential Clutch Disc Assembly - Assemble (11.5 Inch Axle)

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Apply axle lubricant, GM P/N 12378261 (Canadian P/N 10953455) or equivalent meeting GM Specification 9986115, to the surface of each disc.
Assemble the right side or bell-end side clutch disc assembly as follows:
1. Install the 1st eared disc (2) to the side gear (1).
2. Install the 1st carbon splined disc (3).
3. Install the 2nd eared disc (5).
4. Install the 2nd carbon splined disc (6).
5. Install the 3rd eared disc (7).
6. Install the guide clips (3) to the clutch discs (2, 4-7).
  Apply grease to the guide clips in order to hold the clips in place on the disc ears.

Fig 1: Bell-End Side Clutch Disc Assembly (11.5 Inch Axle)

Courtesy of GENERAL MOTORS CORP.