LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1041 (Front Suspension System) >> Repair Instructions >> Torsion Bars Bushing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: This procedure requires the removal of both torsion bars.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the torsion bars. Refer to Torsion Bar Replacement .
  3. Remove the bushing from the bracket utilizing a bushing driver or the equivalent.
scientia non olet · About LEMON Manuals