LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1041 (Front Suspension System) >> Repair Instructions >> Torsion Bars Bushing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the bushing to the bracket utilizing a bushing driver or the equivalent.
  2. Install the torsion bars. Refer to Torsion Bar Replacement .
  3. Remove the safety stands.
  4. Lower the vehicle.
  5. Measure the Z height. Refer to Trim Height Inspection Procedure in Suspension General Diagnosis.
  6. Turn the adjustment bolt clockwise to increase the Z height and counterclockwise to lower the Z height.
scientia non olet · About LEMON Manuals