LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1041 (Front Suspension System) >> Repair Instructions >> Lower Ball Joint Replacement (Coil Spring Suspension) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel assembly. Refer toTire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the lower control arm. Refer to Lower Control Arm Replacement (RWD)  or Lower Control Arm Replacement (4WD) .
  4. Secure the lower control arm in a bench vice or equivalent.
  5. Center punch the rivet heads.
  6. Drill out the rivets.
  7. Remove the lower ball joint.
scientia non olet · About LEMON Manuals