Drive Pinion Flange/Yoke and/or Oil Seal Replacement (All Except 9.75 Inch Axle): Notes

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 8614-01 Flange/Pulley Holding Tool
J 22388 Rear Axle Pinion Oil Seal Installer - Rear (8.6 inch, 9.5 inch axle). See Special Tools and Equipment .
J 44414 Rear Axle Pinion Oil Seal Installer (10.5 inch, 11.5 inch axle). See Special Tools and Equipment .