Drive Pinion Bearings Replacement (9.75 Inch Axle): Notes
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Tools Required
- J 22536 Pinion Driver. See Special Tools and Equipment .
- J 22912-01 Split-Plate Bearing Puller
- J 42176 Universal Driver Handle - Non-Threaded. See Special Tools and Equipment .
- J 45703 Pinion Bearing Race Remover - Dana 248. See Special Tools and Equipment .
- J 45704 Pinion Bearing Race Installer - Dana 248. See Special Tools and Equipment .
- J 45705 Pinion Bearing Race Remover - Dana 248/267. See Special Tools and Equipment .
- J 7818 Inner Bearing Race Installer. See Special Tools and Equipment .
- J 8092 Universal Drive Handle - 3/4 in - 10