Drive Pinion Bearings Replacement (10.5 Inch Axle): Notes

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 22761 Differential Side Bearing Installer
J 8614-01 Flange and Pulley Holding Tool
J 37624 Pinon Bearing Installer. See Special Tools and Equipment .
J 24433 Pinion Cone and Side Bearing Installer. See Special Tools and Equipment .
J 22912-01 Split Plate Bearing Puller
J 44414 Rear Axle Pinion Oil Seal Installer. See Special Tools and Equipment .
J 8608 Rear Pinion Bearing Installer. See Special Tools and Equipment .
J 8092 Universal Driver Handle - 3/4 in - 10