Selectable Ride Indicator Always On

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Step	Action	Yes	No
Schematic Reference: Suspension Controls Schematics Connector End View Reference: Suspension Controls Connector End Views
1	Did you review the system circuit description and perform the necessary inspections?	Go to Step 2	Go to Symptoms - Selectable Ride
2	Turn ON the ignition, with the engine OFF. Press the RIDE CONTROL button several times to alternate from ON to OFF. Does the selectable ride switch indicator alternately turn ON and OFF?	Go to Testing for Electrical Intermittents in Wiring Systems	Go to Step 3
3	Replace the selectable ride switch. Refer to Electronic Suspension Ride Control Switch Replacement . Did you complete the replacement?	Go to Step 4	-
4	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 2