LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1033 (Transfer Case - NVG 149-NP3) >> Repair Instructions >> Transfer Case Speed Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the speed sensor.

    Tighten:  Tighten the sensor to 15 N.m (11 lb ft).

    2. Fig 1: View Of Vehicle Speed Sensor
    GM662047Courtesy of GENERAL MOTORS CORP.
  2. Connect the speed sensor electrical connector (4).
    3. Fig 2: Transfer Case Components
    GM826962Courtesy of GENERAL MOTORS CORP.
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals