LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1033 (Transfer Case - NVG 149-NP3) >> Repair Instructions >> Transfer Case Input Shaft Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transfer case. Refer to Transfer Case Assembly Replacement .
  2. Remove the input shaft seal, using a flat-tipped screwdriver.
    3. Fig 1: Removing Input Shaft Seal
    GM678215Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals