LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1032 (Seat Belt System) >> Repair Instructions >> Seat Belt Retractor Replacement - Rear (Extended Cab) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat. Refer to Seat Replacement - Rear (Extended Cab w/4th Door)Seat Replacement - Rear (Extended Cab)Seat Replacement - Rear (60/40 Split) in Seats.
    2. Fig 1: Seat Belt Assembly - Rear (Extended Cab)
    GM363703Courtesy of GENERAL MOTORS CORP.
  2. Remove the seat belt guide cover (1).
  3. Remove the rear seat belt to body bolts (2).
  4. Remove the rear quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter (Regular Cab) or Trim Panel Replacement - Rear Quarter (Extended Cab) or Trim Panel Replacement - Rear Quarter (Crew Cab) in Interior Trim.
    5. Fig 2: Removing The Rear Seat Belt Retractor - Rear (Extended Cab)
    GM363681Courtesy of GENERAL MOTORS CORP.
  5. Remove the rear seat belt retractor to body bolt (1).
  6. Remove the retractor from the vehicle.
scientia non olet · About LEMON Manuals