Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Remove the seat belt guide cover (1).

Fig 1: Removing The Seat Belt Guide Cover - Center Rear
Courtesy of GENERAL MOTORS CORP.
Remove the rear seat armrest. Refer to Armrest Replacement - Rear Seat (60/40 Split) in Seats.

Fig 2: Releasing The J-Clip From Under The Center Armrest - Center Rear

Courtesy of GENERAL MOTORS CORP.

Release the J-Clip from under the center armrest.
Remove the nut from the seat belt retractor.

Fig 3: Removing The Bolt From The Seat Belt Anchor - Center Rear

Courtesy of GENERAL MOTORS CORP.

Remove the bolt (1) from the seat belt anchor.