LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1027 (Engine Controls - 6.6L (LLY) (Troubleshooting & Diagnosis)) >> Troubleshooting >> Inspection/Maintenance (I/M) Complete System Set Procedure >> Conditions for Running

Conditions for Running

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Cold start

Inspection/Maintenance (I/M) Complete System Set Procedure

Step Action Values Yes No
1 Did you perform the Inspection/Maintenance (I/M) System Check? - Go toStep 2  Go to Inspection/Maintenance (I/M) System Check 
2
  1. Ensure the vehicle is within the Conditions for Running specified in the supporting text.
  2. Turn OFF all of the accessories, e.g., A/C, blower fan, etc.
  3. Set the vehicle parking brake.
  4. Verify the transmission is in PARK for automatic transmissions and NEUTRAL for manual transmissions.
  5. Start and allow the engine to idle for the specified time.
  6. Observe the I/M System Status with a scan tool.
Did both of the I/M System Status indicators update to YES?
2 minutes Go to Step 3  Go to the I/M System Set Procedure for the systems that did not update to YES
3 Observe the Emission Related DTC portion of the I/M System Status with a scan tool.
Does the scan tool indicate any Emission Related DTCs set?
- Go to Diagnostic Trouble Code (DTC) List System OK