LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1021 (Engine Mechanical - 8.1L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Sight Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unsnap the intake manifold sight shield from the stud.
  2. Remove the sight shield from the sight shield bracket.
  3. Remove the sight shield bracket retainer nuts (1), if necessary.
  4. Remove the sight shield bracket from the studs (2), if necessary.
    5. Fig 1: View Of Engine Sight Shield
    GM843779Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals