LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1021 (Engine Mechanical - 8.1L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Tensioner Replacement - Air Conditioning >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the A/C belt tensioner.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the A/C belt tensioner bolts.

    Tighten:  Tighten the A/C belt tensioner bolts to 50 N.m (37 lb ft).

    3. Fig 1: A/C Drive Belt Tensioner
    GM750186Courtesy of GENERAL MOTORS CORP.
  3. Install the A/C drive belt. Refer to Drive Belt Replacement - Air Conditioning .
scientia non olet · About LEMON Manuals