Removal Procedure
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the upper left valve rocker arm cover. Refer to Valve Rocker Arm Cover Replacement - Upper Left .
- Remove the fuel injectors. Refer to Fuel Injector Replacement (Left) or Fuel Injector Replacement (Right) in Engine Controls - 6.6L (LLY).
- Remove the lower valve rocker arm cover bolts.
- Remove the lower valve rocker arm cover.
- Remove the gasket from the lower valve rocker arm cover.
- Inspect the lower valve rocker arm cover gasket for damage, replace if necessary. Otherwise reuse the old gasket.
- If required, clean and inspect the lower valve rocker arm cover. Refer to Valve Rocker Arm Cover Cleaning and Inspection - Lower .