LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1020 (Engine Mechanical - 6.6L (LLY)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Valve Lifter Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cylinder head. Refer to Cylinder Head Replacement - Left  or Cylinder Head Replacement - Right .
  2. Loosen the valve lifter guide retainer bolts.
  3. Remove the valve lifter guide retainers.
  4. Remove the valve lifter guides.
  5. Remove the valve lifters.
    6. Fig 1: View Of Valve Lifter, Guides, Retainers & Bolts
    GM660517Courtesy of GENERAL MOTORS CORP.
  6. If required, clean and inspect the lifters. Refer to Valve Lifters Cleaning and Inspection .
scientia non olet · About LEMON Manuals