LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1020 (Engine Mechanical - 6.6L (LLY)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Oil Level Indicator and Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil level indicator.
    2. Fig 1: View Of Oil Level Indicator
    GM1334847Courtesy of GENERAL MOTORS CORP.
  2. Remove the exhaust manifold. Refer to Exhaust Manifold Replacement - Right (6.6L (LLY) Engine) in Engine Exhaust.
  3. Remove the starter motor. Refer to Starter Motor Replacement (6.6L (LLY) Engine) in Engine Electrical.
  4. Remove the oil level indicator tube bolt at the fuel injection control module bracket.
  5. Remove the oil level indicator tube and O-ring seals.
  6. Remove and discard the O-ring seals.
scientia non olet · About LEMON Manuals