LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1020 (Engine Mechanical - 6.6L (LLY)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Intake Manifold Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the intake manifold cover clamp (1) at the resonator.
  2. Loosen the intake manifold cover bolt (2).
    3. Fig 1: View Of Intake Manifold Cover
    GM1334378Courtesy of GENERAL MOTORS CORP.
  3. Remove the intake manifold cover.
scientia non olet · About LEMON Manuals