LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1020 (Engine Mechanical - 6.6L (LLY)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Valve Rocker Arm Cover Installation - Upper Left

Valve Rocker Arm Cover Installation - Upper Left

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: The gasket may be reused if it is not torn, cracked, stretched, or swollen.
  1. Install the upper valve rocker arm cover.
    2. Fig 1: View Of Upper Valve Rocker Arm Cover & Gasket
    GM1335635Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the upper valve rocker arm cover bolts.

    Tighten:  Tighten the upper valve rocker arm cover bolts to 8 N.m (71 lb in).

    3. Fig 2: Upper Valve Rocker Arm Cover Bolts Tightening Sequence
    GM1411030Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals