Starter Motor Installation

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the starter motor to the flywheel housing.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the starter motor bolts.
Tighten: Tighten the starter bolts to 78 N.m (58 lb ft).

Fig 1: View Of Starter

Courtesy of GENERAL MOTORS CORP.