LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1020 (Engine Mechanical - 6.6L (LLY)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Piston Oil Cooling Nozzle Removal

Piston Oil Cooling Nozzle Removal

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Rotate crankshaft as necessary to obtain access to piston oil cooling nozzles.
  2. Remove the piston oil cooling nozzle eye bolt.
  3. Remove the piston oil cooling nozzle.
    4. Fig 1: View Of Piston Oil Cooling Nozzle
    GM660543Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals